BWBYH - MASONRY CEMENT
- MSDS: BWBYH
- Manufacturer: W R BONSAL CO
- Product Name: MASONRY CEMENT
- National Stock Number: 5610-00N056076
Product Identification
Product ID:MASONRY CEMENT
MSDS Date:01/01/1990
FSC:5610
NIIN:00N056076
MSDS Number: BWBYH
Responsible Party
US
Emergency Phone: 704-526-1621
Info Phone: 704-526-1621
Preparer: FRED GOEMAN
Cage: 3R363
Contractor
Telephone: 704-525-1621
Cage: 3R363
Ingredients
SILICATE, PORTLAND CEMENT; (PORTLAND CEMENT)
CAS: 65997-15-1
RTECS: VV8770000
Fraction By Weight: 58%
OSHA PEL 50 MPPCF; Z-3
ACGIH TLV: 10 MG/M3 TDUST
CALCIUM CARBONATE; (LIMESTONE)
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 40-80%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
GYPSUM
CAS: 13397-24-5
RTECS: MG2360000
Fraction By Weight: 2%
OSHA PEL 15 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF SKIN, EYES, OR
NASAL PASSAGES. WHEN WET, CONTACT WITH SKIN OR EYES MAY RESULT IN
IRRITATION AND OR ALKALI BURNS. CHRONIC:PROLONGED EXPOSURE CAN
CAUSE RESPIRATORY DISORDERS SUCH AS PNEUMOCONIOSIS AND SILICOSIS;
TO SKIN DERMATITIS OR OTHER SKIN DISORDERS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM EXPOSURE, GIVE
OXYGEN IF NEEDED. EYE:FLUSH WITH LARGE QUANTITIES OF WATER FOR @
LEAST 15 MINS. SEE PHYSICIAN. SKIN:WASH WITH SOAP AND WATER.
Fire Fighting
Flash Point:WILL NOT IGNITE
Extinguishing Media:NOT APPLICABLE. USE MEDIA SUITABLE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:CLEAN UP OF SPILLS MAY REQ PERSONAL PROTECTIVE
EQUIPMENT TO PREVENT DUST EXPOSURES & PROTECT AGAINST ALKALI BURNS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN MANNER TO PREVENT CONTACT
WITH STRONG ACIDS. AVOID CONTACT WITH WATER TO PRESERVE PRODUCT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED FOR NUISANCE DUST.
Ventilation:LOCAL EXHAUST. MECHANICAL:MAINTAIN BELOW TLV/PEL.
Protective Gloves:RUBBER, PVC, NEOPRENE GLOVES.
Eye Protection:GOGGLES.
Other Protective Equipment:HIGH TOP BOOTS, BARRIER CREAMS, ARM SLEEVES
AND APRONS WHEN NECESSARY TO PREVENT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV:2.80/2.17 (H*20 =1).
Chemical Properties
Spec Gravity:SUPP DATA
Solubility in Water:SLIGHT (0.1-1.0%)
Appearance and Odor:FINE, GREY POWDER, NO ODOR
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
HIGHLY ALKALINE. CONTACT W/ACIDS WILL PRODUCE A VIOLENT, EXOTHERMIC
REACTION & MAY EVOLVE TOXIC GASES.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE &
FEDERAL REGULATIONS. DOES NOT MEET CRITERIA FOR HAZARDOUS WASTE
(EPA) (40 CFR 261).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.